User manual

Page 90
IEI
®
Technology, Corp.
PPC-5170GS Flat Panel PC
 S-ATA Running Enhanced Mode [Yes]
Use S-ATA Running Enhanced Mode option to select whether the S-ATA interface is
running in enhanced mode or legacy mode.

Yes DEFAULT
The S-ATA interface is running in enhanced mode.

No
The S-ATA interface is running in legacy mode.
 P-ATA Channel Selection [Both]
Use P-ATA Channel Selection option to select the active IDE channels.

Primary
The primary P-ATA channel is set to be the active IDE
channel.

Secondary
The secondary P-ATA channel is set to be the active
IDE channel.

Both DEFAULT
The primary and secondary P-ATA channel are both
set to be the active IDE channels.
 S-ATA Ports Definition [PO-3
rd
./P1-4
th
.]
Use S-ATA Ports Definition option to select the physical ports for S-ATA.

PO-3rd./P1-4th. DEFAULT
Set the physical ports (PO/PI) to be 3
rd
./4
th
.

PO-4th. /P1-3rd.
Set the physical ports (PO/PI) to be 4
th
./3
rd
.
 Configure S-ATA as RAID [No]
The Configure S-ATA as RAID option can only be selected if the IDE Configuration option
is set to “P-ATA Only”. Use Configure S-ATA as RAID option to configure the S-ATA
interface as RAID.

No DEFAULT
The S-ATA interface cannot be configured as RAID drive.

Yes
The S-ATA interface can be configured as RAID drive.