Operation Manual

- Operation -
31
4.8 Redial facility
You can use the redial facility if the person called is engaged or does not reply.
1. Press the button and the last phone number dialled will be shown in the
display. As the display is only capable of showing 18 digits, in the case of
longer phone numbers only the last 18 digits are displayed.
2. Now press the call button and the telephone number displayed will be
automatically dialled. If you do not want to dial the number, simply press the
delete button .
4.9 Using the direct dial button M1
You can save an important telephone number on the direct dial button M1 and dial this
directly with a single press of the button. You can find out how to save this number in
Chapter 5.2.
1. Press the direct dial button M1 and the stored phone number will be dialled
immediately.
4.10 Dialling stored numbers from the phone book
After you have stored a few phone numbers, you can call these up very quickly and
easily. You can find out how to store these numbers in Chapter 5.1.
1. Press the phone book button .
2. Now press the required storage location from 0 to 9.
3. Now press the call button and the telephone number displayed will be
automatically dialled.
4.11 Using the emergency call button
In an emergency, you can quickly dial an emergency number by pressing and holding
the emergency call button. The Fire Brigade number 112 is pre-programmed as the
emergency number. You can find out how you can change this number in Chapter 5.3.
1. Press and hold the button for two seconds and the stored emergency
number will be dialled immediately.
4.12 Muting the microphone in the handset
You can turn off the handset microphone during a call by using the button. It is thus
possible to speak without the other person hearing you. The loudspeaker in the handset
remains switched on and you can continue to hear the other person.
1. Press the button once during a call. The symbol will appear in the display
and the three indicator lights on the mobile unit will illuminate red.
2. To switch the microphone on again, press the button once more. The
symbol will go off and you will be able to continue the call as normal.