Operation Manual

ManualsBrandsAudioline ManualsTelephonesConfi DECT 1

- Phone book -

5.3 Changing the emergency number

In an emergency, you can quickly dial an emergency number by pressing and holding

the emergency call button. The Fire Brigade number 112 is pre-programmed as the

emergency number. If you want to store a different emergency number, proceed as

follows:

1. Press the menu button

MENÜ

until the symbol appears in the display.

2. Press the number 6 NOTRUF on the number pad. The currently assigned

emergency number will appear in the display. The number 112 will appear the first

time the unit is programmed.

3. Press the menu button

MENÜ

again and the number in the display will flash.

4. Now delete the number that has already been entered by repeatedly pressing the

button.

5. Now enter the new telephone number with a maximum of 30 digits.

6. After you have entered the required emergency number, confirm your selection

with the menu button

MENÜ

. You can exit programming without saving by holding

the button pressed.

7. To exit programming after saving, briefly press the button.

5.4 Entering your own phone number

In normal operation, the display is able to show your own phone number. In this way,

you can find out directly which telephone number the conference phone can be reached

on. Your own phone number will also be displayed when you press the

TEL-NR

button

while a call is being made.

1. Press the menu button

MENÜ

until the symbol appears in the display.

2. Press the number 4 TEL-NR on the number pad. The currently assigned phone

number will appear in the display. The display will remain blank the first time the

unit is programmed.

3. Press the menu button

MENÜ

again briefly.

4. Now delete any number that may already have been entered by repeatedly

pressing the button.

5. Now enter the number of the telephone line to which the phone is connected.

6. After you have entered the required number, confirm your selection with the menu

button

MENÜ

. You can exit programming without saving by holding the button

pressed.

7. To exit programming, briefly press the button.