Operation Manual

- Special functions -

7 Programming functions

For better clarity, some buttons on the number pad are inscribed with the programming

functions that are available. Programming functions are selected using the menu button

and the appropriate numbers.

7.1 Setting the ring tone

The mobile unit can respond with five different ring tones when a call comes through.

1. Press the menu button

MENÜ

until the symbol appears in the display.

2. Press the number 1 on the number pad. The number of the currently selected

ring tone will appear in the display.

3. Press the menu button

MENÜ

again briefly and the number in the display will flash.

4. Now select the required ring tone with the numbers 1 to 5. You will hear the

corresponding tone with each selection.

5. After you have found the right ring tone, confirm your selection with the menu

button

MENÜ

. You can exit programming without saving by holding the button

pressed.

6. To exit programming, briefly press the button.

7.2 Setting the flash time

The telephone has flash times of 100ms, 300ms, 800ms and 1000ms (factory setting

100ms).

1. Press the menu button

MENÜ

until the symbol appears in the display.

2. Press the number 3 on the number pad. The currently assigned flash time will

appear in the display.

3. Press the menu button

MENÜ

again briefly and the flash time in the display will

flash.

4. Now select the required flash time with the numbers 1 to 4.

1 = 100; 2 = 300ms, 3 = 800ms; 4 = 1000ms

5. After you have entered the required flash time, confirm your selection with the

menu button

MENÜ

. You can exit programming without saving by holding the

button pressed.

6. To exit programming, briefly press the button.