Operation Manual

64
PRIVATE EXCHANGES/T-NET AUDIOLINE DECT 3000micro
6. T-NET OPERATION / PRIVATE EXCHANGES
You can use the “R” signal button on your telephone on private exchanges and
when using DEUTSCHE TELEKOM’s T-Net functions.
6.1 “R” BUTTON ON PRIVATE EXCHANGES
If you have connected your AUDIOLINE DECT 3000micro to a private exchange,
you can use all the facilities such as call transfer, automatic recall, etc. The “R”
signal button gives you access to these facilities. The FLASH time “100ms” will be
required on a private exchange. (Adjustment, see 6.3). You can find out from the
dealer from whom the equipment was purchased whether your telephone will
work on your private exchange without any problems.
6.2 “R” BUTTON AND THE DEUTSCHE TELEKOM T-NET
Your AUDIOLINE telephone supports the most important DEUTSCHE TELEKOM
added value functions (e.g. brokering, call waiting, three-way conference, etc.).
The T-Net works using the "FLASH 300ms" setting (adjustment, see 6.3). Please
contact DEUTSCHE TELEKOM to gain access to T-Net functions.
6.3 SETTING THE FLASH TIME
PLEASE FOLLOW THE INSTRUCTIONS: Display shows:
Press the button as often as necessary until the
message “BASE SETTING” appears in the display.
BASE SETTING
Confirm the selection with .
WAITING =>
SETTING DIAL
Press the button as often as necessary until the
message “FLASH TIME” appears in the display.
FLASH TIME
Confirm the selection with and you will see the
current setting FLASH or EARTH in the display.
FLASH or EARTH
Select the mode required, FLASH or EARTH, by
pressing the
button repeatedly.
FLASH or EARTH
Confirm the selection with and you will see the
current setting of the FLASH or EARTH time in the
display.
e.g. FLASH 0300