Operation Manual

65
AUDIOLINE DECT 3000micro PRIVATE EXCHANGES/T-NET
Select the required time in milliseconds by repeatedly
pressing the
button or by using the arrow keys.
DtMF or PULSE
Confirm the selection with
FLASH TIME
You can return to the main menu by holding the
button.
User name
e.g. Multi 1
If you want to exit programming, please press the
button twice for one second.
User name
e.g. Multi 1
6.4 OUTSIDE LINE CODE
With some private exchanges, it is necessary to dial a certain number (e.g. “9” or
“0”) in order, after a short pause, to obtain a dialling tone for an outside line on the
extension. After being set up for your exchange, your AUDIOLINE DECT
3000micro automatically inserts a dialling pause when the outside line code is
detected. Three different outside line codes can be entered.
PLEASE FOLLOW THE INSTRUCTIONS: Display shows:
Press the button as often as necessary until the
message “PABX SETTING” appears in the display.
PABX SETTING
Confirm the selection with
PABX SET 1
Now use the button to choose which of the three
memory locations you want to use to store an outside
line code.
PABX SET 1 to 3
Confirm the selection with . If no outside line
code has already been entered in this location, the
message “EMPTY” appears.
e.g. EMPTY
Now enter the required outside line code. e.g. 9
Confirm the selection with
PABX SETTING
You can return to the main menu by holding the
button.
User name
e.g. Multi 1
If you want to exit programming, please press the
button twice for one second.
User name
e.g. Multi 1