Operation Manual

- Normal Use -

3.11 Temporary tone dialling

If your telephone line will only allow PULSE dialling, you can still use the advantages of

TONE dialling (e.g. listen to a remote answering machine). During a call, you can press

the

button to switch temporarily to TONE dialling.

At the end of the call, your telephone will automatically switch back to PULSE dialling.

3.12 Paging the handset from the base station

If you can no longer remember where you have left your handset, press the button

on the base station. For thirty seconds, the handset will emit its signal tone and should

then be easy to find. To stop the tone, press any button on the handset or the

button

on the base station.

3.13 Keypad lock

If you frequently carry the handset with you, you can lock the keypad so that buttons are

not pressed unintentionally. When the keypad lock is switched on, incoming calls can be

received as normal.

Activating the keypad lock

Press the

and the º buttons on the handset. The display shows the symbol .

Deactivating the keypad lock

To deactivate the keypad lock, press the

_,`and º buttons simultaneously.