Operation Manual

- Special Functions -
46
6.5 Change display name
In normal operation, the display shows "DECT5501 HS1". If you have a number of
handsets operating from the one base station, it can be useful to give each handset a
name of its own. The name is followed by the number that is used to call the handset
internally.
1. Press the menu button, .
2. Use and to select the HANDSET menu, then press .
3. Use and to select the NAME function, then press .
4. Enter the desired name using the number buttons. Brief pressure on the
C/
button can be used to erase single letters.
5. Press to store the new name.
6. You can then select further menu functions or exit by holding down
C/
.
6.6 Turning indicator tones on and off
There are various indicator and warning tones that can be turned on or off.
Button click
The handset emits a confirming click each time that a button is pressed. The button click
can be turned on or off.
Low battery warning
If the batteries are too low, a beeping warns that the handset needs recharging.
Range warning
If you are too far from the base station, a beep warns that you should move closer to it
in order to maintain contact.
1. Press the menu button, .
2. Use and to select the HANDSET menu, then press .
3. Use and to select the BEEP function, then press .
4. Use and to select KEYTONE, LOW BATT or OUTRANGE, then press .
5. Use and to select ON or OFF, then press .
6. You can then select further menu functions or exit by holding down
C/
.