Operation Manual

- Setting Up -

2.7 Registering handsets

1. Hold down the paging button, on the base station for 10 seconds until it beeps

twice. You now have 90 seconds to register the new handset.

NOTE: During a log-on to a base station of another manufacturer, please have a

look in this operating instruction, as you prepare the base station for registering a

new telephone handsets. If you made the necessary inputs, continue with point 2.

2. Press the button on the handset.

3. Use and to select the REGISTER menu, then press .

4. Now use the number buttons to enter the number of the base station (1 - 4). If the

handset is already registered with a base station, the corresponding numbers will

blink.

5. Press the button again.

6. Now enter the PIN number for the base station (factory setting, 0 0 0 0).

7. Now press the menu button, , and you will hear a beep for a few seconds.

The handset is now registered and can be used for external and internal calls.

8. An internal number will now have been allocated to the handset. The first handset

registered (main handset) has the internal number 1. Any further handsets that are

registered are allocated internal numbers (2 to 5) in the order of registration. This

internal number is shown in the display to the right of the name.