Operation Manual

- Normal use -

3.3 Making calls

1. Use the key pad to enter the desired telephone number. Up to 25 digits may be

entered. The digits pressed will be shown in the display. Since the display can only

show 12 digits, only the last 12 of long phone numbers will be shown.

Notice: If you make a mistake you can briefly press the button to delete one digit at

a time. If the button is held down, the entire number will be deleted.

2. Press the call button, , on the handset to place the call.

Notice: You can also press the call button, , first; you will then hear the dial tone. As

you enter the digits of the desired number, your AUDIOLINE DECT5501 will send them

straight out. The correction of individual digits as described above is not possible in this

case.

3.4 Internal calls

Once you have a number of handsets on a base station, you can make internal calls.

To do so, press the

button and then the number of the handset being called. On the

handset called, the call is taken by pressing the call button,

3.5 Connecting external calls to another handset

If you have taken an external call on one handset, you can connect the call to another

handset. To do so, press the

button and then the number of the handset being

called. Once the internal call is taken on the other handset, you have the following

possibilities:

A. Three way calling: you can now speak with the internal caller and use the

button to switch back to the external caller. You can switch between the internal and

external connections as often as you wish.

B. Forward the call: By pressing the call button,

, on the first handset, the call can

be forwarded to the second handset.

You can also forward a call directly to another handset without waiting for an answer by

pressing the

button, "dialling" the second handset and then pressing the call button,