Operation Manual

- Phonebook -

4. The phonebook

Up to 50 telephone number /name pairs can be stored in the phonebook. The maximum

length of a stored number is 20 digits.

4.1 Entering numbers in the phonebook

1. Press the menu button, . The display will show PHONEBK.

2. Press the button again. The display will show ADD.

3. Press the button again. The display will show NAME.

4. Now enter the name (up to 8 letters) from the key pad. In the next section you will

find more information on entering names.

5. Press the button again. The display will show NUMBER.

6. Enter the desired number from the key pad.

7. Press the button again. The display will now show ADD once again.

8. If you wish to store more phone numbers, go back to step 3. To exit from the entry

mode, hold down the button.

Further information about the phonebook:

If the memory capacity of 50 numbers has been used, the display will show FULL. In this

case, some numbers will need to be deleted before new ones can be entered.

How to enter names

The number buttons of the key pad are also marked with letters. By pressing the

appropriate button a number of times, capital letters, digits and special characters can be

entered.

Example: you wish to enter the name, "Peter".

To do so, press:

1 x button 7, 2 x button 3, 1 x button 8, 2 x button 3, 3 x button 7.

To enter a space, use the 1 button.

To enter the same letter twice, press for the desired letter and then wait for the display

cursor to move automatically to the next position.

Entry errors can be deleted with the

button.

In order to change a particular letter, the

and buttons can be used to move the

cursor to the right and left so that a new letter can be entered.

Press 1 button twice, to enter a hyphen (dash).