Operation Manual

- Special functions -
54
8.2 Further programming functions
The following functions are available in this menu:
1/3 Enter network type
2/3 Change FLASH time
3/3 Insert automatic pause
Programming steps Indication in the display
1. Press the button followed by
two presses of the
(d) button.
The
symbol flashes
2. Confirm with .
1/5 3 – B – C- or D
3. You can now set the required
network type between A and D with
the
(b) and (d) buttons.
1/3 A
The standard setting here is A and
is designed for the public telephone
network. If there should be
problems with the volume when
connected to private exchanges, try
the other settings B, C and D.
4. Confirm with .
2/3 current FLASH time, e.g.
***
5. The required FLASH time of 84ms
(private exchanges) or 270ms (T-
NET) can be set here with the
(
b) and (d) buttons.
2/3
***
84ms =
***
270ms =
******
6. Confirm with .
3/3 automatic pause e.g. NO
7. You can now set whether the
automatic pause is to be used with
the
(b) and (d) buttons.
Further information in Chapter 7.3.
3/3
NO
YES
8. Confirm with .
1/3A – B – C- or D
9. Exit programming with the
button.