Operation Manual

- Operation -

4.5 Calling internally

You can make internal telephone calls as soon as you connect multiple handsets

to a base station.

To do this, press the

button. All further handsets that are connected to the

base station will now ring simultaneously. The call is accepted at any of the

handsets by pressing the call button

4.6 Connecting external calls to another handset

If you have accepted an external call on one handset, you can transfer the external

call to another handset. To do this, press the

button. After the internal call

has been accepted at another handset you have the following alternatives:

A. Consultation / Brokering: You can talk to the internal party and revert to the

external caller by pressing the

button. You can swap between the external

and internal calls as often as you wish.

B. Transfer the call: The external call is transferred to the receiving handset by

pressing the call button

on the first handset.

You can also transfer the external call directly to a handset without consultation by

pressing the

button followed immediately by the call button .

4.7 Call duration display

The call duration is shown in the display in minutes and seconds during a call. The

display switches from showing the number dialled to showing the call duration 10

seconds after dialling. The call duration still remains showing in the display for a

few seconds after the call has been ended.

4.8 Range information

The range of the handset is about 50 metres in enclosed areas and about 300

metres in the open air. When there is good contact with the base station, the

symbol will come on in the display. If you are too far away from the base station

the symbol will flash.