Operation Manual

- Multiple handsets -
73
4. Confirm with
.
2/3 current FLASH time, e.g.
***
5. The required FLASH time of 84ms
(private exchanges) or 270ms (T-
NET) can be set here with the
() and ( ) buttons.
2/3
***
84ms =
***
270ms =
******
6. Confirm with .
3/3 automatic pause e.g. NO
7. You can now set whether the
automatic pause is to be used
with the
() and ( )
buttons. Further information in
Chapter 7.3.
3/3
NO
YES
8. Confirm with .
1/3 A – B – C- or D
9. Exit programming with the
button.
9.4 Adjusting the receiver volume
If you want to change the receiver volume on the handset you have four volume
steps available.
Programming steps Indication in the display
1. Press the button followed
by four presses of the
( )
button.
The
symbol flashes
2. Confirm with .
1/1 ++ (volume level 2 as the factory
setting)
3. You can now adjust the volume
using the
() and ( )
buttons.
1/1 + or ++ or +++ or ++++
4. Confirm with .
1/1 + or ++ or +++ or ++++
5. Exit programming with the
button.