Operation Manual

− Setting Up the Telephone −

6.5 Touch & dial

Use this function to store a set phone number that will be dialled when

any button (except ) is pressed.

6.5.1 Saving a touch & dial number

, 3 Enable programming mode

ë,  Enter the PIN code and confirm

ë,  Enter and confirm a phone number

6.5.2 Touch & dial on/off

Select a setting to enable or disable the Touch & Dial function. If it is

enabled, the saved phone number is shown on the display. The Touch &

Dial function can only be switched on when a Touch & Dial number has

been stored beforehand (refer to chapter 6.5.1).

, 2 Enable programming mode

ë, 2 x  Enter the PIN code and confirm

6.6 External answering machines

Assuming your telephone network provider makes an external

answering machine available to you, the phone number for calling the

external answering machine can be assigned to key 1.

The external answering machine is an optional service from the network

provider. Contact your network provider for further information.

6.6.1 Saving the phone number of the external answering machine

, 8 Enable programming mode

ë,  Enter the PIN code and confirm

ë,  Enter and confirm a phone number

6.6.2 Phoning the external answering machine

2 sec 1 Connect to the external answering

machine