Operation Manual

Telephoning
47
Holding a call / brokering
While a call is in progress, it is possible to dial another handset in order to con-
sult with someone. The external caller is put on hold while you converse with the
second, internal person called. You can switch between the callers as often as
necessary.
HS1:
Int
,  or 
e.g.
Handset 2
, Ok Dial the internal call number during the
conversation with the external caller
HS2:  Take the internal call on the other handset
HS1:
Brok
Change back and forth between the callers
Conference calls
An external call can be transferred to another internal handset for a conference
call.
HS1:
Int
,  or 
e.g.
Handset 2
, Ok Dial the internal call number during the
conversation with the external caller
HS2:  Take the internal call on the other handset
HS1:
Conf
Start the conference
At this point, you can switch between the two callers as necessary and
then back to the conference.
HS1/HS2:  The conference is terminated by one of the
internal handset users ending the call
Adjusting the receiver volume
The volume can be adjusted to one of 5 settings during a call.
 or  Select the required volume
Talk time display
The duration of a received call is displayed in hours, minutes and seconds during
the call.