Operation Manual

- Operation -

5.2 Headset LED status

Your Bluetootht headset is equipped with a Status LED (refer to Operating

Elements) which indicates the status of the headset.

Power adapter plug is not connected:

Headset status LED status

Headset switched off Off

Pairing mode On (continuously)

Pairing successful Flashes fast 10 times

Standby (no audio connection) Flashing interval 3 sec, flash duration

0.1 sec

Audio connection established Flashing interval 8 sec, flash duration 2 sec

Note: If your headset is paired with a Bluetootht telephone and no

operation is initiated for approx. 5 minutes, the Status LED is switched

off to save electricity. Press any button on the headset to switch the

Status LED on again whereby it starts to flash.