Operation Manual

Starting Up

Pairing a Bluetooth phone

Before the headset can be used, the pairing process must be completed

between the headset and Bluetooth telephone. Refer to the operating

manual provided with the Bluetooth telephone for further information on

this topic. When the pairing process has been completed once between the

headset and telephone, they subsequently detect each other and continue

to as long as the pairing information is not deleted on either of the devices.

The pairing process need not be completed again. If the pairing information

has been deleted from the telephone in the meantime, repeat the entire pro-

cess.

1. Ensure that the headset is charged and

switched off. The headset and Bluetooth

telephone should be close to each other, if

possible.

2. Press and hold the MF button (1) until the

Status LED lights up continuously. The

headset is now in Pairing mode.