Operation Manual

Operation

Headset LED status

Your Bluetooth headset is equipped with a Status LED (refer to Operating

Elements ) which indicates the status of the headsets.

Power adapter plug is not connected:

Headset status LED status

Headset switched off OFF

Pairing mode On (continuously)

Pairing successful Flashes fast 10 times

Standby (no audio connection) Flashing interval 3 sec, flash duration

0.1 sec

Audio connection established Flashing interval 8 sec, flash duration

2 sec

If your headset is connected with a Bluetooth telephone and no

operation is initiated for approx. 5 minutes, the Status LED is swit-

ched off to save electricity. Press any button on the headset to

switch the Status LED on again whereby it starts to flash.