Operation Manual

− Starting Up −
24
3 Starting Up
3.1 Safety Information
Hinweis: It is essential to read the General Information" in
Chapter 1 at the beginning of this manual before
starting up.
3.2 Checking the package contents
The package contains:
a transmitter
a receiver a holding clip
two power adapter
plugs
two battery packs a velcro strip
an audio/video cable an operating manual
3.3 Connecting the transmitter (mains
operation)
Hinweis: Ensure to use the correct power adapter plug,
otherwise there is a risk the transmitter could be
damaged. The transmitter may only be operated
using the power adapter plug with an output power of
800 mA (angled plug).
1. Open the battery compartment on the rear side of the
transmitter. To do this, press the clamping clip
downward and remove the cover.
2. Connect the plug leading from the rechargeable
battery pack to the corresponding socket in the
battery compartment.
3. Place the battery pack in the battery compartment.
4. Close the battery compartment cover.
5. Insert the small, angled plug on the power adapter
plug cable in the corresponding socket on the
underside of the transmitter.