Operation Manual

− Starting Up −
26
1. Drill two holes (5 mm diameter) 30 mm apart and
horizontal to each other.
2. Insert a dowel (5 mm diameter) in each hole.
3. Insert a screw (4 mm diameter) in each dowel.
Hinweis: Leave approx. 3 mm from the head of the screw to
the wall.
4. Align the recesses on the respective device over the
screw heads and pull the device down lightly.
3.7 Operation on a television set
The audio and video signals can be transmitted to a television
or video recorder. The audio transmission is in mono. In the
case of a stereo unit, the sounds are only transmitted from one
channel.
1. Connect the black phone jack in the TV OUT" socket
on the rear side of the receiver.
2. Connect the yellow and red phone plugs in the
correspondingly coloured sockets in your colour
television or video recorder. For further information,
refer to the operating manual provided with the
respective device.