Operation Manual

− Operation −
27
4 Operation
Hinweis: Check the transmitter and receiver are working
properly each time before the equipment is put into
operation.
4.1 Transmitter
4.1.1 Switching the transmitter on /off
Hinweis: Position the transmitter out of reach of children!
Never lay the transmitter in a baby’s bed or playpen.
1. Set the channel switch on the transmitter to the same
channel (1−3) as that set on the receiver.
2. Set the operating mode switch to ON". The power
control lamp on the underside lights up. The
transmitter is now ready to operate. It transmits
sounds and pictures to the receiver from the area
being monitored.
3. Place the transmitter in a favourable position, point
the lens to the area to be monitored and turn the lens
head to the necessary angle.
4. To switch the transmitter off, set the operating mode
switch to OFF".
Hinweis: The receiver issues an acoustic signal when the
battery charge is low.
4.1.2 Nighttime vision
The transmitter is equipped with six infra−red diodes. This
enables the transmission of pictures from areas which are not
illuminated.
1. To activate the nighttime vision function, set the
operating mode switch to NIGHT".
Hinweis: When the nighttime vision function is activated, the
screen display on the receiver turns to black and
white.