Operation Manual

− Operation −

4.2 Receiver

4.2.1 Switching the receiver on /off

1. Turn the volume control towards ON", the receiver is

switched on.

Regulate the volume to that required using the

volume control.

2. Press the CHANNEL" button as often as necessary

until the same channel (1−3) is set as that on the

transmitter. The current channel is indicated in the

display:

The receiver is now ready to operate. It receives the sounds

and pictures transmitted by the transmitter activated at the

installation location.

3. To switch the receiver off, turn the volume control

towards OFF" until it audibly clicks.

Hinweis: The

Y icon flashes when the battery charge of the

receiver is low.

4.3 Screen settings

The brightness, contrast and colour intensity of the screen can

be adapted to individual needs.

4.3.1 Brightness / Contrast / Colour intensity

1. Press the MENUE" button. The

icon appears in

the display.

2. Press the y or z button to regulate the

brightness. The setting selected is indicated by bars

at the bottom edge of the display.

3. Press the MENUE" button. The

icon appears in

the display.

4. Press the y or z button to regulate the

contrast.