Operation Manual

− Operation −
29
5. Press the MENUE" button. The icon appears in
the display.
6. Press the y or z button to regulate the colour
intensity.
7. Press the MENUE" button. The settings are
completed.
Hinweis: If the menu is activated and no input is made for a
period of 15 seconds, the menu is closed. You can
exit from the menu at any time by pressing the
MENUE" button as often as necessary until the
corresponding icons no longer appear in the display.
4.3.2 Switching the Auto mode on/off
If no sound is detected by the transmitter for a period of 15
seconds, the screen switches to AUTO mode and is
deactivated. When a sound is subsequently detected or a
button is pressed on the receiver, the screen is automatically
reactivated.
1. Press and hold the CHANNEL" button (4 seconds)
until a short acoustic signal is issued. AUTO appears
in the display.
2. To switch AUTO mode off, press and hold the
CHANNEL" button (4 seconds) until a short acoustic
signal is issued. AUTO disappears from the display.
4.4 Battery mode
If the equipment is to be used powered by the battery pack,
disconnect the power adapter plug connectors from the sockets
on the transmitter and receiver.
The battery charge capacity is indicated in the display by a
battery icon. Operating time with charged battery refer
to Chapter 6.1, Technical data.
Hinweis: In the case of a power failure or disconnection from
the mains supply, the devices are switched off when
still connected to the power adapter plug. To switch to
battery mode, disconnect the power adapter plug
connectors from the devices.