Operation Manual

− Troubleshooting −
30
5 Troubleshooting
If you experience problems with the Monitor Set, please refer to
the information below first of all.
In the case of technical problems, you can also contact our
hotline service, tel. [phone] (cost via Telekom at time of
going to print: 12 ct/min).
In the case of claims under the terms of guarantee, contact
your sales outlet. There is a 2 year period of guarantee.
Faults
Cause
Equipment does
not function
− Transmitter and/or receiver are not
switched on.
− Battery pack is discharged or defect.
No reception − Transmitter and receiver are not swit-
ched to the same channel.
− Transmitter is too far from object being
monitored, e.g. baby. Observe the mini-
mum distance of one meter.
− Distance between the receiver and
transmitter is too large.
− Volume setting of the receiver is too
low.
Reception inter-
ference
− Distance between the receiver and
transmitter is too large.
− Battery power is too low.
− Select another channel on the receiver
and transmitter.
− Other electronic devices cause interfe-
rence in the field of transmission.
Beeping noise
(acoustic feed-
back)
− Increase the distance between receiver
and transmitter.
− Reduce the volume on the receiver.