Operation Manual

26
How to use
3 How to use NFS-100
1. Press Í/mem button as illustrated.
2. All symbols are displayed on the LCD
screen when starting up.
3. When ready, the symbol ( __._ ) appears
on the display and the thermometer is
ready to use.
4. Gently hold the NFS-100 as illustrated.
When starting a measurement, press the
measure button once and firmly place
the probe flat on the skin.
5. Slowly slide the probe from the middle of
the forehead to the hairline, keeping the
instrument flat and in contact with skin.
You should scan the forehead slowly, just
like wiping the skin, for 3 seconds. The
measurement should start from the cen-
tre of the forehead, with the probe paral-
lel to the eyebrows, toward the temporal
area and not down the side of the face.
The probe and the forehead should be at
right angles to each other.