Operating instructions

− Telephone Answering Machine −
51
11.8.2 Recording outgoing messages
Your own outgoing message must be minimally 5 seconds and maximally 1:30 minutes long. The
respective, pre−recorded outgoing message is replaced by the one you record. The pre−recorded
outgoing messages can be restored simply by deleting your own outgoing messages (refer to
Chapter 11.8.4).
Using the base station:
2 sec # Activate Setting mode
Press and hold or  Record for OGM 1 or 2
, $ Speak your message after the acoustic signal
Release or  Stops recording of OGM 1 or 2
Using the handset in the OGM Settings menu:
 or 
Record OGM
,  Select the function and confirm
 or 
e.g.:
Ans & Rec
,  Select OGM 1 or OGM 2 and confirm
, $ Speak your message after the acoustic signal
 End recording
11.8.3 Playing back outgoing message
Using the base station:
# Play outgoing message currently set
Using the handset in the OGM Settings menu:
 or 
Play OGM
,  Select the function and confirm
 or 
e.g.:
Ans & Rec
,  Select OGM 1 or OGM 2 and confirm
11.8.4 Deleting your own outgoing message
After deleting your own outgoing message, the pre−recorded message is automatically reactiva-
ted.
Using the base station:
# Play the outgoing message currently activated
% Press the button during playback to delete the OGM
Using the OGM Settings menu on the handset:
 or 
Delete OGM
,  Select the function and confirm
 or 
e.g.:
Ans & Rec
,  Select OGM 1 or OGM 2 and confirm
11.9 Messages / Memos
11.9.1 Memory capacity
The answering machine can digitally save up to 59 incoming messages with a total length of 18
minutes. The maximum length for each incoming call is 3 minutes. If the caller’s message is lon-
ger, the call is disconnected. If there is a pause in excess of 8 seconds during recording, the call
is automatically ended. When the answering machine memory is full, the answering mode wio-
thout recording" is activated automatically.
11.9.2 Memos
A memo is a message left on the answering machine for other answering machine users and is
treated in the same way as an incoming message. A memo cannot be longer than 2 minutes.
Using the TAM Settings menu on the handset:
 or 
Record Memo
,  Select the function and confirm
, $ Speak your message after the acoustic signal
 End recording