Operation Manual

Operating the Walkie-Talkies

4 Operating the Walkie-Talkies

Switching the walkie-talkie on/off

For switching on the walkie-talkie press and hold down

the On/Off key. A “beep" sound will be heard and the

LCD screen will display the current channel.

For switching off the walkie-talkie press and hold down

the On/Off key. A “beep" sound will be heard and the

LCD screen will turn blank.

Volume control

Press ▲ or ▼ to increase or decrease the volume.

Transmitting and receiving

Transmitting Press the PTT button. TX will be displayed on the LCD

screen.

☞ Hold the walkie-talkie approx. 5 to 7 cm from your mouth and speak at

a normal volume. In order to talk to other subscribers, the respective

walkie-talkies must be set to the same channel.

Receiving The unit is continuously in receive mode when the unit is

turned ON and not transmitting. When a signal is

received on the current channel, the receive signal icon

RX will be displayed on the LCD screen.

☞ Radio signals cannot be received when the PTT button is being

pressed.

Transmit ringing tone

The ringing tone indicates to other subscribers that you want to talk to

them. A condition for this is that the other subscribers are using the same

channel.

Send ringing tone.