Operation Manual

- Operation -

1. Press the MODE button three times. The

indicator

will flash in the display.

2. Channel search is switched on with the

button and

switched off with the

button.

3. Confirm the selection with the talk button on the left-hand

side.

4. All channels will now be scanned one after the other. As

soon as a channel is found that is currently in use,

channel search will be interrupted for 2 seconds. Press

the TALK button during this time if you want to keep the

channel that has been found and exit the channel search.

Channel search can be switched off at any time with the

MODE button.

3.12 Selecting a call tone

You can transmit a call tone to the other radios using the

button (see 3.5) when you want to begin a call. 10 different

melodies are available.

1. Press the MODE button four times. The CA TONE

indicator will flash in the display.

2. Select the required call tone between 1 and 10 using the

and buttons.

3. Confirm the selection with the talk button on the left-hand

side.