User guide

Helpline 0844 800 6503 (See page 32 for costs and hours of operation)
7
GettinG started
Set up your phone
Connect your corded phone base
1. Plug the power adapter into the socket marked
DC 9V 300mA
on the back of
your phone base and the other end into the mains power wall socket and
switch on.
2. Plug the telephone cable into the socket marked TEL.LINE on the back of
your phone base and the other end into the phone wall socket.
3. Plug one end of the handset cable into the handset and the other end into
the side of the base.
Important: use only the power adapter and telephone line cord supplied
with your PowerTel 68 Plus otherwise your phone may not work.
Mains power
wall socket
Telephone
wall socket
1 2
Socket for Vibrate Pad (PTV100)
available as an accessory