Operation Manual

45
Operating the Telephone
35
4 Operating the Telephone
Display and notation of operation sequences
 Enter digits or letters
 Press the button depicted briefly
3 sec  Press the button depicted for 3
seconds
 Handset rings
 Remove the handset from the base
station
 Place the handset in the base station
MUTE
or Text or icon in the display
Icons in the handset display
Icon Description
A connection to the base station is available.
If the connection deteriorates, you will hear the
acoustic range warning signal.
OUT OF
RANGE
The handset no longer has a connection to the base
station. Move nearer to the base station.
The key lock is activated.  Page 38
The ringing tone has been switched off.  Page 38
The alarm clock is activated.  Page 49
Enter text in small letters.  Page 47
Indicates a new voice message has been recorded if
the answering machine in the telephone network is
activated (supplementary service offered by your tele-
phone network provider).  Page 43
Full battery charge capacity.
Low battery charge capacity.
LOW BAT-
TERY
You will also hear the battery warning signal.
Please charge the telephone.
Run−through segments:
Batteries are being charged.  Page 33
HANDSET 1 Name of the handset.  Page 45
OO:OO Time display.  Page 45
SPKR Handsfree mode has been activated.  Page 38
MUTE The microphone is switched off.  Page 38
TALK A normal telephone call is taking place.
Standby mode
The following operating instructions assume that the handset is in Standby
mode.
The buttons and the display light up when Standby mode is active.
In addition, READY appears in the display.
Activate Standby mode by pressing the  button.
Energy−save mode
When the handset has been in Standby mode for some time, it automati-
cally switches to energy−save mode. The buttons and display are no
longer lit up. The time appears in the display.
Press any button to reactivate Standby mode.
Service−Hotline Germany: Tel. [phone] (cost via Telekom at time of going to print: 12 ct/min)