Operation Manual

− Phone Book −
63
8 Phone Book
When in standby, press the  button to open the phone book menu. The phone book can
be used to store a maximum of 150 phone numbers together with the associated names. A
name can have a maximum of 16 characters. The maximum length of a phone number is 20
digits.
8.1 Entering phone numbers in the phone book
1. Press the  button. The phone book opens in the display.
NOTE: To complete the first entry in the phone book, proceed with Step 4 at this point.
2. Press the  button.
3. Use the  or  buttons to select the Add Entry" option in the display.
4. Press the  button. The message Name" appears in the display.
5. Enter the name using the digit keys.
NOTE: Refer to 8.1.1 to enter text.
6. Press the  button. The message Number" appears in the display.
7. Enter the relevant phone number using the digit keys.
8. Press the  button. The entry is confirmed in the display.
9. To store more phone numbers, repeat steps 3 to 9.
10. Press the  button to reset the handset to standby mode.
8.1.1 Text entry
The digit keys are also labelled with letters for the entry of the respective letters. Letters and
digits are entered by pressing the relevant key the respective number of times.
Example: To enter the name Peter".
Press: 1 x button , 2 x button , 1 x button , 2 x button , 3 x button 
S To enter a space, press  once.
S To enter the same letter twice, press the relevant button until the letter appears then
wait till the cursor automatically skips one position forward.
NOTE: Delete any incorrect entries with the  button.
Press the  or  button to move the cursor to the left or right.
8.1.2 Notes on the phone book
S Always enter the area access code with the phone numbers so that the telephone
can also assign incoming local calls to a phone book entry.
S If the memory capacity of 150 phone numbers is reached, a corresponding
message appears when an attempt is made to store another number. In order to
create space, existing entries must be deleted.