Operation Manual

− SMS Text Messages −

Two call numbers for the SMS function must be programmed in the handset. One phone

number for sending and one phone number for receiving text messages. If you want to use the

services offered by another provider, the respective call number(s) must be programmed in the

handset. Proceed as described in 9.1.1.

NOTE: The registering procedure for the various providers differs. Please contact the

provider of your choice for the necessary call numbers of the centres and the

procedure for enabling the SMS service.

9.1.1 Entering the send/receive centre numbers

1. Press the  button.

2. Use the  or  button to select the SMS" option in the display.

3. Press the  button.

4. Use the  or  button to select the Settings" option in the display.

5. Press the  button.

6. Use the  or  button to select the Service Centres" option in the display.

7. Press the  button.

8. Use the  or  button to select the "Receive Centre" option in the display. Enter the

phone number stipulated by the provider of your choice.

9. Press the  button.

10. Use the  or  button to select the Sending Centre" option in the display. Enter

the phone number stipulated by the provider of your choice.

11. Press the  button.

12. Press the  button to move back one menu level at a time.

9.2 Writing and sending

NOTE: It is not possible to send an SMS message from a PABX system. The PABX Access

Code" must be deactivated in order to send an SMS message (refer to Chapter

11.7).

1. Press the  button.

2. Use the  or  button to select the SMS" option in the display.

3. Press the  button.

4. Use the  or  button to select the Write Message" option in the display.

5. Press the  button. Enter the text using the digit keys. A maximum of 160

characters are possible.

NOTE: Refer to 8.1.1 to enter text.

NOTE: To enter a symbol, press the  button while entering the text. Use the  or 

button to select the Insert Symbol" option in the display. Press the  button. Use

the  or  button to select the required symbol. Press the  button. The text

entry display reappears. Carry on entering your text.

6. Press the  button.

7. Use the  or  button to select the Send to" option in the display.