Operation Manual

− SMS Text Messages −

9.9.2 Displaying mailbox/user data

NOTE: In order to configure the mailbox operation with the telephone network provider, you

need the mailbox ID (extension number). The general mailbox has the mailbox ID

0". When other users are registered, the lowest mailbox ID available is

automatically assigned (1−4).

1. Press the  button.

2. Use the  or  button to select the SMS" option in the display.

3. Press the  button.

4. Use the  or  button to select the Settings" option in the display.

5. Press the  button.

6. Use the  or  button to select the User" option in the display.

7. Press the  button.

8. Use the  or  button to select the required user in the display.

9. Press the  button. Enter the relevant password.

10. Press the  button.

11. Use the  or  button to select the Terminal Number" option in the display.

12. Press the  button. The terminal number is displayed.

NOTE: The terminal number displayed under Step 12 corresponds to the mailbox ID of the

telephone network provider.

13. Press the  button to move back one menu level at a time.

9.9.3 Sending an SMS message to a personal mailbox

NOTE: SMS mailboxes can only be used if the telephone network provider offers the facility.

Please request a configuration instruction manual on setting up mailbox operation

from your telephone network provider.

In order to receive a text message in your personal mailbox, the sender must know your

mailbox ID and append it to your phone number.

You can send an SMS message to the receiving party containing information on your personal

mailbox.

This SMS provides your SMS partner with your SMS call number including the current mailbox

ID and it can be stored in the phone book. If the mailbox ID is invalid, the SMS message will

not be sent.