Operation Manual

− Base Station Settings −
86
14.4 Setting the recall time
Two recall times are available for selection, Recall 1" (100 ms) or Recall 2" (300 ms). A recall
time of 100 ms is required for operation in private branch exchanges. The T−Net provided by
Deutsche Telekom, for example, operates with a recall time of 300 ms.
1. Press the  button.
2. Use the  or  button to select the Base settings" option in the display.
3. Press the  button. Several options appear in the display.
4. Use the  or  button to select the Recall Mode" option.
5. Press the  button. Two recall times appear in the display for selection.
6. Use the  or  button to select recall time Recall 1" (100 ms ) or
Recall 2" (300 ms).
7. Press the  button. The assignment is confirmed in the display.
8. Press the  button to move back one menu level at a time.
14.5 Changing the system PIN
1. Press the  button.
2. Use the  or  button to select the Base settings" option in the display.
3. Press the  button. Several options appear in the display.
4. Use the  or  button to select the System PIN" option.
5. Press the  button. The message Enter old PIN" appears in the display.
6. Enter the old PIN (default setting: 0000). A 
*
" appears in the display instead of the
number actually entered. If you enter an incorrect digit, delete it by pressing the 
button.
7. When the old PIN has been correctly entered, press the  button. The message
Enter new PIN" appears.
8. Enter a new PIN (max. 8 digits possible).
9. Press the  button. The message Confirm new PIN" appears.
10. Enter the new PIN once again.
11. Press the  button. The assignment is confirmed in the display.
12. Press the  button to move back one menu level at a time.
NOTE: If you forget your PIN code, it can only be reset with the aid of our Service Hotline.
For information on our Service−Hotline, please refer to the back cover of the
operating manual.