Technical data

English
7
Sub Out
This a symmetrical and buffered output representing the input signal. This en-
ablesyoutochainasmanySub20inarowasyoulike.TheSubLeveleffectsthe
output,sothatallpossiblechainmemberscanbelevelledatatime.Insteadof
oneverybigsubwooferitoftenisbettertohave2smalleronestoavoidstandingwavesat
verylowfrequencies.Thisalwaysmeansalittlebitoftesting,asitisnotpossibletopredict
thebehaviourofasubwooferinunknownacousticalconditions.
Input - Balanced and Unbalanced
Thesestereojacks-XLRinthebalanced(alsonamed:symmetri-
cal),CinchorRCAintheunbalanced(alsonamed:asymmetrical)
case, should be connected to the output of your mixing console
or stereo/surround sound system.
Satellite out - Balanced and Unbalanced
Thesejacksshouldbeconnectedtotheinputsofyouractive
studiomonitorsortheinputsofapowerampthatdrivespas-
sivemonitors.Thesignalissimultaneouslyavailablefromall
connectors.
Final recommendation:
After using the set up a few times we recommend to test the position of the controls again.
Inmostcases,whentheexcitementaboutthenewbottomhasbecomeless,youprefera
solutionwithlessbasslevel,andfromourexperiencethiswillbethemorecorrectone.
Controls and Connectors