Operation Manual

- Operation -

Deleting all redial numbers

To delete all numbers from the redial list, proceed as follows:

1. Press the

button.

2. Hold the

button pressed until DELETE ALL? appears in the display.

3. Confirm with the menu button

and the telephone number will be deleted from the redial

list.

4.11 Keypad lock

If you frequently carry the handset with you, you can lock the keypad so that buttons are not

pressed unintentionally. Incoming calls can be received as normal when the keypad lock is

switched on.

Activating the keypad lock

Press the

button on the handset for three seconds. The symbol will appear in the

display.

Deactivating the keypad lock

To deactivate the keypad lock, press the

button twice.

Note: The keypad lock can also be activated via the menu.

4.12 Temporary tone dialling

If you can only use your telephone in Pulse Dialling mode, you do not have to forego the facilities

of Tone Dialling (e.g. interrogating an answering machine). You can change temporarily to Tone

Dialling during a call by means of the

button. PULSE dialling will be reselected at the end

of the call.

4.13 Paging from the base station to the handset

If you cannot remember where you have left the handset, press the button on the base

station. You will hear the handset audible signals for 30 seconds and thus be able to find it again

easily. You can cancel the audible signals earlier by pressing any button on the handset or the

button on the base station.