Operation Manual

- Special functions -

9 Special functions

All further programming functions can be accessed by means of a very user-friendly menu. Here

are a few general instructions to help you find your way around the menu:

Programming is started by means of the

button. The symbol comes on in the display

during programming.

You can find the required level using the and buttons.

This level is opened using the

button.

In turn, you can find the required function using the and buttons and again confirm

with the

button.

You can go back one level each time by pressing the button.

Each save procedure will be cancelled automatically if no input is made within 15 seconds.

You can leave programming mode at any time without making any changes by pressing and

holding the

button.

You will find a complete overview of the menu in Chapter 9.13.

9.1 Setting the ring tone on the handset (ring melodies)

Your handset can respond with three different ringing tones when a call comes through. If you

are using the telephone system with several handsets, you can set different ring tones for

external and internal calls.

1. Press the menu button

2. Select the HANDSET menu with and and confirm with

3. Select the function EXT MELODY (ring tone for external calls) or INT MELODY (ring tone

for internal calls/with two handsets only) with the and buttons and confirm with

4. Select the required melody with and and confirm with

5. Now select further menu functions or exit the menu by pressing and holding the

button.