Operation Manual

- Special functions -

9.8 Activating/Deactivating warning tones

Here, various warning tones can be activated or deactivated.

Button click

Each time a button is pressed, the handset confirms with a button click. The button click can be

switched on or off.

Warning tone for low battery

If the battery capacity is too low, a warning tone will remind you that you must charge the

handset.

Range warning

If you are too far away from the base station, a warning tone will remind you that you are losing

contact with the base station.

1. Press the menu button

2. Select the HANDSET menu with and and confirm with

3. Select the BEEP function with and and confirm with

4. Select one of the functions KEYTONE, LOW BATTERY or OUT RANGE with and

and confirm with

5. Switch the selected warning tone on or off with and and confirm with

6. Now select further menu functions or exit the menu by pressing and holding the

button.

9.9 Changing the PIN code

Some functions of the telephone system are protected against unauthorised use by a PIN code.

The PIN code consists of four numbers. As supplied, the PIN code is set to "0000". To change

the PIN code, proceed as follows:

1. Press the menu button

2. Select the SETUP menu with and and confirm with

3. Select the PIN CODE function with and and confirm with

4. Now enter the current four-digit PIN code using the number pad (factory setting 0 0 0 0)

and confirm with

5. Now enter the new four-digit PIN code using the number pad and confirm with

6. Now enter the new four-digit PIN code once more for confirmation and confirm with

7. Now select further menu functions or exit the menu by pressing and holding the

button.

If the old PIN code is not entered correctly, the process will be aborted.