Operating instructions

- Operation Answering Machine -
32
5.5 Listening to messages
If the message LED (new message) is flashing, then new calls have been recorded
during your absence.
LISTENING TO MESSAGES
Press the
button once. If the message LED (new message) is flashing, your
answering machine will now first play back the newly recorded messages. If the
LED is not flashing, then all the recorded messages that you have not yet deleted
will be played back. If no messages have been saved, you will hear several signal
tones.
If you want to interrupt the playing back of the messages, press the
button.
You can resume listening to messages by pressing the
button again.
Listening to messages is terminated by pressing the
button.
After the last message has been played, the machine responds with two signal
tones.
REPEATING CURRENT MESSAGE
Press the
button to repeat the message currently playing.
REPEATING PREVIOUS MESSAGE
Press the
button until you hear a signal tone to repeat the previous
message.
SKIPPING ONE MESSAGE
Press the
button once to skip the message currently playing. The
answering machine now starts directly with the next message.
FAST FORWARD
Press the
button several times in succession. In this way, you can rapidly
skip several messages.
DELETING A SINGLE MESSAGE
Press the
button while the message is being played. The display will briefly
show the message dE (delete).
SAVE ALL MESSAGES
No input required.
DELETE ALL MESSAGES
After the last message has been played, you will hear two signal tones. Now press
the
button until you hear a further signal tone.