Operating instructions

- Operation Answering Machine -

5.8.3 Remote access facilities

Call your own telephone number and allow the greeting message to run through

to the end. Wait until your answering machine is ready to record a message.

After the signal tone, enter your personal authorisation code by pressing the

appropriate numbers on a telephone.

Two signal tones confirm that the right code has been entered. Now select one of

the functions listed below by pressing the appropriate combination of keys. The

pause between entering the individual functions must not exceed 12 seconds as,

otherwise, the connection will be cut off automatically.

Replay all recorded messages Press 2 and #

Replay newly recorded messages Press 2 and 5

Note: While you are listening to the messages, the unit asks every 2 minutes and

40 seconds, whether you still want to carry on listening. The answering machine

stops and you will hear three signal tones. Enter any number to continue playing

back the messages.

While playing back, you have the following facilities:

Skip current message Press 7 and #

Repeat current message Press 8 and #

Repeat previous message Press 6 and #

Delete current message Press 3 and #

After the last message, the machine answers with several signal tones. Now,

within the next 7 seconds, you have various possibilities. If you do not make any

input within these 7 seconds, the connection will be cut off automatically and all

messages will remain saved.

Repeat all messages Press 2 and #

Delete all messages Press 3 and #

Switch off answering machine Press 9 and #

After this input, the answering machine is no longer ready for operation.

Save all messages no input