Operating instructions

− INSTALLATION −
22
2.7 SETTING THE CLOCK
The present time is shown in the display. To set the clock, please proceed
as follows:
1. Press the SET button beneath the display once. The hours figure in the
display starts to flash.
2. You can now enter the present time using the +/− button. To do this,
press the +/− button until you see the present hour in the display.
3. Now press the SET button again and the minutes figure in the display
starts to flash.
4. You can now enter the present number of minutes by repeatedly
pressing the +/− button.
5. Press the SET button. The time is set.