Operating instructions

− THE R" SIGNAL BUTTON −

4 THE "R" SIGNAL BUTTON

You can use the "R" signal button on your telephone on private exchanges

and when using DEUTSCHE TELEKOM’s T−Net functions.

4.1 "R" SIGNAL BUTTON ON PRIVATE EXCHANGES

If you have connected your telephone to a private exchange, you can use

all the facilities such as call transfer, automatic recall, etc. The "R" signal

button gives you access to these facilities. The FLASH time "100ms" will be

required on a private exchange.

For this purpose, set the "FLASH" switch, located on the right side of the

telephone, to the "100ms" setting.

You can find out from the dealer from whom the equipment was purchased

whether your telephone will work on your private exchange without any

problems and what further facilities you will receive from this.

4.2 "R" SIGNAL BUTTON AND THE DEUTSCHE TELEKOM T−NET

FUNCTIONS

Your AUDIOLINE Telephone 48 Extra Plus supports the most important

DEUTSCHE TELEKOM added value functions (e.g. brokering, call waiting,

three−way conference, etc.). The T−NET works using the "FLASH 300ms"

setting.

For this purpose, set the "FLASH" switch, located on the right side of the

telephone, to the "300ms" setting.

Please contact DEUTSCHE TELEKOM to gain access to the T−NET

functions (some of which are subject to charge).