User guide

13
MEMORY NUMBERS AUDIOLINE FF895-2
EDITING/DELETING A MEMORY
To edit or delete a name or number from the memory do the following:
## Select the [MEM/OK] button and enter the memory location number(01 - 30 ) using
the keypad digits.
## Press [MENU] button until “Edit??” or “Delete??” appears.
## Press the [MEM/OK] button to start editing/deleting the data. The remainder of the
operation is the same as when storing memories (see page 11).
CHANGE A MEMORY CALL TYPE
To change a memory call type, do the following:
## Select a memory position using the operation described above, ie press the [MEM/OK]
button and enter the memory location using the keypad digits.
## Press the [MENU] button until “Set Mem Type” appears.
## Press the [MEM/OK] button.
# Press the [MENU] button to change the call type (Normal, VIP or Block call)
# Press the [MEM/OK] button to store the information.
NOTE: The different call types that can be selected to determine the type of ring
that the FF895-2 emits when the incoming call numbers have been programmed into
the dialling memories (refer to Menu Options on page 19).
MEMORY MATCH FUNCTION
If you receive a call from a phone number which is already stored in the dialling memory
(Normal, VIP or Block) the ringer sound will change according to the memory type,
normal ring for normal memory, a higher tone for VIP memory and no ringer for block
memory. See page 21 for more information.
The numbers stored into memories must be identical in format to the presentation of the
number sent by the network (for example the area code must be stored even for local
numbers and no spaces etc.).
NOTE: The memory match function will not work for “Out of Area” or numbers
that have been barred. Calls via PBX or from mobiles may also not display CND
information.