User guide

AUDIOLINE FF895-2 CALLING NUMBER DISPLAY

PLAYBACK INCOMING MESSAGE(ICM) WITH CND

To playback an incoming message that has been stored in the call log do the following:

## Press the [CALLER DISPLAY/ANSWERING SYSTEM] button, you will hear a beep,

when entering CND mode. Ensure that the number associated with the message you

want to hear is shown in the display. If there is an ICM together with the current

CND, the display shows “Incom. Mess”.

## To play the message press digit 5 (MESSAGE) on the keypad. You can adjust the

volume with the or arrows.

## To stop the message press digit 3 (STOP) on the keypad and to hear the message

again press digit 4 [ ] on the keypad.

# To skip the current message digit 6 [ ] on the keypad.

NOTE: During playback if the ICM is longer than 30seconds, you will need to

press digit '5' before the 30second limit to continue, otherwise the unit will return to

standby mode.