User guide

26
AUDIOLINE FF895-2 HANDSET REMOTE CONTROL
HANDSET REMOTE CONTROL
The base unit telephone answering machine (TAM) can be remotely controlled through
the handset.
Press the [CALLER DISPLAY/ANSWERING SYSTEM] button for several seconds to enter
the handset remote mode. Refer to the keys below to control the TAM.
HANDSET REMOTE CONTROL FUNCTIONS
To Press
Access general mailbox *0
Access mailbox 1 *1
Access mailbox 2 *2
Access mailbox 3 *3
Playback message 51
Playback new message 52
Stop current message 3
Skip current message 6
Repeat current message 4
Playback OGM1 11
Playback OGM2 21
Record a new OGM1* 12 start recording after beep
Record a new OGM2* 22 start recording after beep
Turn on/off the answering function 8 the system will announce if the status is on/off
Record memo* 7 start recording after beep
Delete message being played back 9 during message playback
Delete all old messages 99 when system is idle
Exit line remote control Caller Display/Answering System
* When the recording is complete press digit number 3 to stop the recording.
When digit 3 is pressed on the OGM record the recorded message will automatically play.