User guide

31
AUDIOLINE FF895-2 BASE UNIT FUNCTIONS
ANSWERING MACHINE ON/OFF
To switch the machine ON/OFF, do the following:
# In standby mode press and release the [STOP] button to turn the answering machine
on/off. The system will announce “answering functions are ON/OFF”. The display
will indicate “- -” if it is switched off.
ANSWERING MODE SELECTION
To change the answering mode, do the following:
# Press the [STOP] button to turn on the answering machine.
When the display shows the current answer mode, press Vol . or Vol to select
a different answer mode.
If the display shows --, the answering machine function is off.
If the display shows 3r, the answering machine will answer after 3 rings.
If the display shows 6r, the answering machine will answer after 6 rings.
If the display shows “AO”, it indicates announce only mode is on and the caller will
hear the OGM2 which will tell them that the message memory is full.
“Announce only” can only be selected when OGM2 is recorded.
If the display shows “tS”, toll saver is selected and the answering machine will start
after 3 rings (4 rings if CND is associated) if there are new messages recorded. If
there are no new messages, the machine will start after 6 rings (7 rings if CND is
associated)..
SILENCE MODE SELECTION
When the telephone is in auto answer you can hear the OGM and the caller’s message
through the base speaker. To turn off the sound do the following:
# Press the [SKIP] button to turn ON the silence mode, display shows “Si”.
# Press the [REPEAT] button to turn OFF the silence mode.