User manual

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
3 Overview 1
3.1 Defining the EDID 2
3.2 Recommendations for Achieving the Best Performance 2
4 Defining the WP-101 XGA/Unbalanced Stereo Audio Line Transmitter 2
4.1 Installing and Connecting the WP-101 XGA Line Transmitter 4
4.1.1 Installing the WP-101 XGA/Stereo Audio Line Driver 4
4.1.2 Connecting the WP-101 XGA/Stereo Audio Line Driver 5
4.2 Grounding the WP-101 XGA/Stereo Audio Line Driver 5
4.3 Wiring the AUDIO OUT 8-Pin Terminal Block 5
4.4 Wiring the RGBVHV OUT 9-Pin Terminal Block 6
4.5 Wiring the Power Connector 7
5 Assigning an EDID 7
5.1 Capturing the EDID from a Display Device 7
5.2 Setting a Preconfigured EDID 8
5.3 Setting the Equalization 9
6 Technical Specifications 10
Figures
Figure 1: WP-101 Front Panel and Rear Panels 3
Figure 2: Connecting the WP-101 XGA/Stereo Audio Line Driver
4
Figure 3: WP-101 Grounding Components
5
Figure 4: Audio Out Terminal Block Pinouts
6
Figure 5: RGBHV OUT Video Terminal Block Pinouts 6
Figure 6: WP-101 Power Supply Connection
7
Figure 7: WP-101 PCB Assembly Front View with Face Plate Removed
8
Tables
Table 1: WP-101 Front and Rear Panel Features 3
Table 2: WP-101 Grounding Component Descriptions 5
Table 3: WP-101 PCB Assembly Features
8
Table 4: WP-101 Rotary Switch EDID Resolution Settings
9
Table 5: Technical Specifications of the WP-101
10