User manual

Defining the WP-101 XGA/Unbalanced Stereo Audio Line Transmitter
3
3
Figure 1: WP-101 Front Panel and Rear Panels
Table 1: WP-101 Front and Rear Panel Features
# Feature Function
1 AUDIO IN 3.5mm Mini Jack Connect to an unbalanced stereo audio source
2 PC IN XGA 15-Pin HD (F) Connector Connect to an XGA video source
3 ON LED Lights red when receiving power, lights green when
receiving a signal from a video source
4 +12V PIN Power Spring-Loaded Terminal
Block
Connect to the positive (red/+) of the power adapter
GND PIN Connect to the negative (black/-) of the power adapter
5 AUDIO OUT 8-pin Audio Line-level Output
Spring-Loaded Terminal Block
Connect to balanced and/or unbalanced stereo audio
acceptor1 (see
Section 4.3
6
)
Ground
Ground connection. Ring-tongue terminal and grounding
screw (see
Section 4.2
7
)
RGBHV OUT
Component
Video Output
2
RGBHV Video Output Cables
with Female BNC Connector
Terminations
Connect to RGBHV component video acceptor (see
Section 4.4
8
)
RGBHV OUT 9-pin RGBHV
Video Output Spring-Loaded
Terminal Block
Connect to RGBHV video acceptor (see
Section 4.4 )
1 Both balanced and unbalanced outputs may be used simultaneously
2 Only one of these outputs can be active at a time. You cannot connect both simultaneously