Operation Manual

29
AUDIOLINE VR200 OPERATION
ERASING INDIVIDUAL MEMOS
 First select the message that you want to erase. To do this,
use the FILE button and the multi switch
.
 Then press the ERASE button for one
second. The memo will be played back
and the message “ERASE” will flash in the
display.
 Press the ERASE button once more to
erase the memo. If however you want to break off the erasing
process, press any button other than the ERASE button.
ERASING COMPLETE ARCHIVE FILES
 First select the required file A, B, C or D that you want to erase
by using the FILE button.
 Now press both the REC and ERASE
buttons simultaneously for three
seconds. The display shows the
message “AL ERASE”.
 Press the ERASE button once more to
erase the memo. If however you want to break off the erasing
process, press any button other than the ERASE button.